For screen reader problems with this website, please call610-687-35556 1 0 6 8 7 3 5 5 5Standard carrier rates apply to texts.
Main Line Sound & Video
610-687-3555
Parasound® NewClassic 2 Channel Power Amplifier
At a Glance
Fully discrete circuitry with high current toroid transformer. Automatic on/off by audio signal with 2 sensitivity settings. Bridging switch for stereo or mono operation. Standby, channel status and high temperature indicators.
Proposition 65 Warning for California Residents
Connections
| Analog Audio(RCA) Output | 1 |
|---|
Other
| Speaker A/B Switching | Yes |
|---|
Specifications
| Power On Consumption (watts) | 350 |
|---|---|
| Power Off Consumption (watts) | 0.5 |
| Bridged Power per Channel | 200 |
| Watts RMS per Channel (4-ohms) | 150 |
| Watts RMS per Channel (8-ohms) | 90 |
General Specs
| Depth (in.) | 16 |
|---|---|
| Height (in.) | 2.5 |
| Width (in.) | 17.25 |
| Channels | 2 |
| Analog Audio(RCA) Input | 1 |
| Color Finish Name | Black |
| Product Weight (lbs.) | 20 |
| Color | Black |
Parasound® NewClassic 2 Channel Power Amplifier
Model #: NewClassic 275 v.2
Call for Best Price
At a Glance
Get to know this product.
90 watts x 2 into 8 O (all channels driven)
150 watts x 2 into 4 O or 2 O (all channels driven)
200 watts x 1 bridged into 8 O or 4 O
20 amps peak current per channel
2 Ohm stable operation with load selector switch
Two pairs of speaker outputs with front panel A/B buttons
Rear-mounted lockout switch disables front A/B buttons
High pass filter, switchable for 20Hz or 40Hz
Automatic on/off by DC trigger with looping output
Automatic on/off by audio signal with 2 sensitivity settings
Fully discrete circuitry with high current toroid transformer
Bridging switch for stereo or mono operation
Efficient, low heat design
DC Servo and relay protection circuits
Rear-mounted left and right gain controls
Standby, channel status and high temperature indicators
Gold-plated RCA input jacks
Heavy duty 24k gold-plated 5-way speaker terminals
115/230v selector on rear panel
Power Output - (RMS power, 20 Hz - 20 kHz) All Channels Driven
90 watts x 2, 8O
150 watts x 2, 4O
150 watts x 2, 2O (Load switch set to 2-3O)
Bridged Mono
200 watts x 1, 8O
200 watts x 1, 4O (Load switch set to 2-3O)
Current Capacity
20 amps peak per channel
Frequency Response
20 Hz - 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom
1.3 dB
Total Harmonic Distortion
0.35% at full rated output
0.025% at average listening levels
IM Distortion
0.05 %
Transient IM Distortion
Not measurable
S/N Ratio
110 dB at rated output, IHF A-weighted
103 dB at rated output, unweighted
93 dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted
Input Impedance
33 k O
Input Sensitivity
800 mV for full rated output (28dB)
Inter-Channel Crosstalk
80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz
Damping Factor
Over 150 at 20Hz
12V Trigger Turn On
DC 9 - 12V, 15 mA
Audio Turn On
Quieter: 1 mV
Louder: 6 mV
AC Power Requirement
110 - 120 V / 220 -240 V, 50 - 60 Hz
0.5 watts standby
25 watts Idle (no audio)
350 watts full output
Dimension
Height without feet: 1.75”
Useful Documents
Proposition 65 Warning for California Residents